How to use

Put the car at the lowest level and open the bleed screw. Drain the hydraulic fluid. Fill Hydroflush. Start and let the motor run 5-10 minutes of idling to get out the air bubbles. Tighten the bleed screw.

Drive 1500 - 5000 km.

Put the car on the lowest level and open the bleed screw. Drain the hydroflush. Clean the container and all the filters with petrol (also the plastic plate in the bottom). Then blow dry with compressed air.
Fill LHM. Start the engine and allow 5-10 minutes at idle to get out the air bubbles. Tighten the bleed screw. Bleed the brakes until clean LHM without air bubbles comes out.
Top up the LHM.